Sony FVS-1000 System Maintenance Manual page 181
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
(2) Loosen the two screws securing the slide
plate assembly.
(3) Insert a slotted screwdriver in the adjusting
hole of the slide plate assembly, and adjust so
that the position data (HEX) of potentiometer
becomes specification 2 by moving the
position of slide plate assembly to the arrow
direction.
(4) While keeping the state of step (3), tighten
the screw loosened in step (2).
(5) Again confirm that the position data (HEX)
of potentiometer satisfies the specification 2.
n
Press " ; " key of the PC and confirm the
latest position data (HEX).
(6) Remove the weight of tension regulator
adjustment tool.
(7) Exit the test mode and disconnect the PC
connection cable (9 pin-ELCO) from the
connector CN400 of SV-191 board.
FVS-1000 MMP1
4-5. Replacing the Tension Regulator Assembly
Slide plate
Screws
Adjusting hole
assembly
4-15
Advertisement
Table of Contents
