Sony FVS-1000 System Maintenance Manual page 53
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
Installation
(3) Install the 8P integrating sphere to the gate base (35) assembly using the two one-touch screws 1.
(4) Install the gate base (35) assembly to the FVS-1000.
(5) Perform the electrical adjustment
After installation, perform Section 6-6-2 "35 mm Integrating Sphere Offset/Gain Adjustment" and
Section 6-6-3 "16 mm/8P Integrating Sphere Adjustment"
These adjustments should be performed when the integrating sphere is attached in the unit for the first
time, the mounted circuit board inside the integrating sphere is replaced or the lamp is replaced.
3. Slide Adaptor Installation
Align the two pins of the gate base (35) assembly with two holes of slide adaptor, and place the slide
adaptor on the gate base (35) assembly.
Slide adaptor
Retainer (35) assembly
FVS-1000 MMP1
Gate base (35) assembly
Screw1
Gate base (35) assembly
Screw1
8P integrating sphere
Holes
Pins
Gate base (35) assembly
1-11. Installation of Optional Units
Slide adaptor
1-41
Advertisement
Table of Contents
