Sony FVS-1000 System Maintenance Manual page 155
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
7. Adjusting the pad roller clearance
(1) Rotate the pad roller shaft in the arrow direction using
the flatblade screwdriver. Then temporarily tighten the
setscrews with all pad rollers touching the roller
clearance adjustment tool (film).
Pad roller clearance
adjustment tool (Film)
Pad roller shafts
(2) Rotate the pad driving lever using the flatblade
screwdriver and set the unloading state.
(3) Remove the pad roller clearance adjustment tool
installed in step 4.
(4) Remove the pad assembly once, and tighten the
setscrews securing the pad roller shafts (four each on S
side and T side).
8. Checking the film running
(1) Install the pad assembly to the base plate.
(2) Turn on the power of the unit.
(3) Install the test film for running check to the S reel
table, and hook it to the T reel table along the running
path.
(4) Run the film in the PLAY mode, and check the film
does not dislocate from the sprocket gear.
If the film dislocates from the sprocket gear, remove
the pad assembly, and repeat from steps 4 through 7.
(5) Install the drive cover (3) removed in step (1) of 6.
FVS-1000 MMP1
Pad roller shafts
3-4. Replacement of Periodic Replacement Part
3-25
Advertisement
Table of Contents
