Siemens SINUMERIK 840D sl Operating Manual page 492

Create MyConfig - Topo
6.6 Command line call
Starting Topo
Topo is started with the following command, and a file can be displayed and edited.
Topo <Topology path>
Comparing topologies
Two topologies can be compared with the following command, i.e. two files are displayed and
can be edited.
Topo /diff <File1> <File2>
Automated Topo deployment
Create MyConfig Topo can be executed in command line mode for automated deployment.
Topo /silent <Topology path>
The possible deployment modes are listed in the following table.
Table 6-14
Deployment mode Explanation
UST
UTZ
EXE
USZ
UVDX
Notes
Note the following information for the command line call:
Note
Deployment version
If no deployment version is specified for the "UTZ", "USZ" and "EXE" deployment modes, the
defined deployment versions are used in the source for the individual CUs. If no deployment
version is defined, the newest version is deployed.
Note
Observe the sequence of the switches
The switches should be written to in the specified sequence.
When doing this, observe the "Call" section and the "Significance of the switches" table.
492
/deploy [<Deployment name>] [/deploydir <Deployment directory>]
/target (UST|UVDX|(UTZ|USZ|EXE[27|44|45|47|48])) [/autocomplete]
[/log <Log file>] [adduvdx <Uvdx path>] [extendcompnames]
Deployment modes
Comparison topology
User-specified topology
Extended user-specified topology as Windows package.
Extended user-specified topology as Linux package.
DOs and components used in the topology as extended DO list.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE