Siemens SINUMERIK 840D sl Operating Manual page 486

Create MyConfig - Topo
6.5 Axis-drive assignment
Moreover, it is possible for the project engineer for Expert and the operator during package
execution to deactivate this automatic Axis-drive assignment without having to open and edit
the topology files.
If "No" is selected during activation, the stored Axis-drive assignment is not used.
Tabular view for configuration
Example of a tabular view for configuration
Figure 6-19 Table axis-drive assignment - representation standard
In the lower status area/legend of the dialog, the assignment colors are explained and the
essential axis-drive assignment highlighted.
The table corresponds to the topology representation, i.e. if assignment has occurred and an
axis has been clicked, the associated drive object will be selected in the topology image.
Button "Info" at the top right of the dialog shows a brief overview of the axis-drive assignment.
Additional table columns can be displayed and hidden using the
486
button.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE