Siemens SINUMERIK 840D sl Operating Manual page 183

You can configure the following property groups for the "CNC software" dialog page:
● Dialog
● Installation
● CNC software (*.tgz)
● Dialog scripts
Figure 4-27
By selecting the "data areas" in the "Package" tab, the usable dialog pages are defined in the
"Dialog" tab.
You can find an overview for this in the Dependencies of the dialog pages of data areas
(Page 144) section.
Show/hide inactive dialogs button
Clicking the
project.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
CNC software - project engineer view
button (Show/hide inactive dialogs) shows or hides dialogs not used in this
Create MyConfig - Expert
4.4 Project folder
183