Siemens SINUMERIK 840D sl Operating Manual page 41

①
List of the available comparison configurations
The existing comparison configurations are listed in this area of the configuration dialog and
can be selected by clicking them.
Configurations shown in gray are user-specified configurations; these can be changed, but not
deleted - and can be restored again at any time.
②
Buttons for managing the configurations
You can mange configurations via this button.
A new configuration is created via "Add", which can also be adapted.
A copy of the selected comparison configuration is created via "Duplicate".
With "Restore user-specified setting", the changes to the specified comparison configuration
are undone.
Note
The "Restore user-specified setting" button is only active if a user-specified configuration has
been selected the contents of which are no longer the same as the default setting.
In addition to restoring the default setting, this button can also be used to check whether the
contents are identical with those of the default setting.
③
Main nodes in the structure tree
The properties that belong to the selected configuration are saved in this area of the
Configuration dialog; these properties include display criteria, filter criteria and a comment.
④
Background color
So that the user can immediately recognize how to select certain comparison configurations,
a separate background color can be defined for each comparison configuration.
Display tab
In the "Display" tab, you can define which main nodes should be displayed in the data structure
tree, assuming that data is available in the comparison object (archive or file) for this main
node.
Further, you can define whether the data should be sorted in alphabetic order or similar to that
used in an NC in the data list.
Expert list tab
Using the Expert list, you can specify a (large) number of identifiers that should either be
included or excluded for the comparison.
Always enter the identifiers completely in the "Expert list". The only exception is the field data
in the identifier.
Example:
A $MA_CTRLOUT_NR[0] entry in an inclusion list precisely includes this identifier.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Diff
3.3 SINUMERIK archive comparison
41