Command Line Call - Siemens SINUMERIK 840D sl Operating Manual
Integrate create myconfig - diff, expert, topo
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Create MyConfig - Diff
3.7 Command line call
The configurations available in the file are displayed and grouped according to application
areas.
①
②
③
The "Import" button transfers the selected configuration to Diff.
If a configuration is to be transferred to Diff, for which a configuration with the same name
already exists in Diff, then you are prompted as to whether the existing configuration should
be overwritten.
3.7
Command line call
To be able to use Diff via the context menu, e.g. in Windows Explorer, Diff has been provided
with switches.
The switches also enable Diff to be called via the command line.
Call
Write the following commands as well as all deployed switches and arguments to a batch file
or in a command line interface in one line.
110
Activating or deactivating a group node means that this action is accepted for all con‐
figurations of the group.
By activating the individual configurations, for each configuration you can define wheth‐
er this should be imported.
Group nodes are shown in gray if there is no configuration for the group in the file.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Advertisement
Table of Contents
