Siemens SINUMERIK 840D sl Operating Manual page 201

The following properties available for the "user-specified topology (*.utz)" are activated when
the package is executed:
List
Preselection
Note
The "SINAMICS topology" dialog differs during package execution depending on whether the
drive configuration "User-specified topology" or one of the three other variants has been
selected in the "System configuration" dialog.
DO variables
The following properties available for the "DO variables" are activated when the package is
executed:
List
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Clicking the button opens the "List of user-specified topologies (*.utz)"
dialog.
Select the desired User-specified topology (*.utz) from the list.
User-specified topologies can be pasted or inserted as link at "List".
These are also saved in the package during deployment and can be selected
during package execution.
Select a user-specified topology (*.utz) that is to be preselected for the
package execution.
Alternatively, enter the path of a file which is located next to the package "/
<Path>/<File>", e.g. "user-specified topology.utz".
Clicking the button opens the "DO list" dialog.
Enter the "DO variable" and its associated data here:
● DO type
● DO No.
● DO name
● Description
Or you link or import an externally stored file.
Create MyConfig - Expert
4.4 Project folder
201