Data Access Operations - Siemens SINUMERIK 840D sl Operating Manual

● The <path> path of the external file to be included can be specified as an absolute path
or relative path.
<path> contains the storage location and the file name, e.g.
D:\Temp\Skript.txt or .\Skript.txt..
For internal (manipulation) tasks, the relative path refers to the storage folder of the
component.
For external (manipulation) tasks, the relative path refers to the storage folder of the external
task.
In step and dialog scripts, the relative path refers to the storage folder of the package.
The path can contain Windows environment variables (e.g. %SUB_PATH%).
● Ctrl-click on the line or use of the "Open external task" context menu item opens the file in
the CMC Script Editor.
4.6.14

Data access operations

Alternative data accesses
As an alternative to setting a section (Page 281), the section can also be specified directly
using a fully qualified identifier during access.
This section specification has a higher priority compared to the last setting for the section.
Section setting: [C?],[B?_S?_PS??], [SL].
Access to NC, DRV and BD data from step and dialog scripts can only be realized using these
fully qualified identifiers.
Overview of data accesses
The following is shown in the subsequent table:
● At which locations of the script processing can data be read or written and with which syntax.
● Data and their associated notation are listed as examples.
Table 4-27 Overview of data accesses: Read only/read and write
Data Dialog
accesses pages
Dialog
scripts scripts
Read only
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Cross-area
Step Action
scripts
Fully qualified identifiers for area data NC, DRV, HMI
Step tree
Manipulation tasks
All NC data
NC[C1].$MC_CHAN_NAME
PS[B3_S3_PS3].P105
BD[SL].$MM_SW_OPTIONS
Create MyConfig - Expert
4.6 Script language
Area specific
DRV data BD data
333