Siemens SINUMERIK 840D sl Operating Manual page 170

Create MyConfig - Expert
4.4 Project folder
Show/hide inactive dialogs button
Clicking the
project.
Display associated system variables button
Clicking the
System variables" dialog. All system variables used for "NCU/PPU access" are listed here.
Information on the system variables·can be found in the System variables for the NCU/PPU
access dialog (Page 375) section.
Further general information on the system variables can be found in the Reference list system
variables (Page 368) section.
Dialog
More detailed information about the "Dialog" property group can be found at Package
configuration (configuring) (Page 153).
Address
The following property is available:
Preselection
Login information
The following settings are available for the "Login information" property:
User name
Password
Note
Package execution and access rights
● For the automatic package execution locally on the NCU/PPU, e.g. via a USB stick, the
package is automatically assigned the required rights by the system.
Dialog scripts
In the "Dialog scripts", "Scripts" entry, click the
this dialog, you can edit scripts to be executed at selectable times during package execution.
170
button (Show/hide inactive dialogs) shows or hides dialogs not used in this
button (Display associated system variables) opens the "NCU/PPU access -
Preselects the IP address of the control (NCU or PPU).
The preselection is relevant only if the package is executed on a Win‐
dows system.
For a connection via X120/X127, "192.168.214.1" is always available
in the drop-down list.
Login information (user name, password) can be stored for access to
the NCU/PPU.
In a new project, they are preset to standard user name"manufact" and
the appropriate password.
button to call the "Dialog scripts" dialog. In
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE