Notes On The Topology (Package Execution) - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.4 Project folder
Show/hide inactive dialogs button
Clicking the
project.
Display associated system variables button
Clicking the
- system variables" dialog. This dialog lists all system variables used for "Notes on the
topology".
Information on the "Notes on the topology - system variables" can be found in the "System
variables" section for Up.$Dialog.DriveTopologyNotes (Page 379).
Further general information on the system variables can be found in the Reference list system
variables (Page 368) section.
Dialog
More detailed information about the "Dialog" property group can be found at Package
configuration (configuring) (Page 153).
4.4.2.27

Notes on the topology (package execution)

This dialog sends notes on the "SINAMICS topology" to the operator.
Dialog view during package execution (for commissioning engineers / operators)
A file in text format or HTML format with operating instructions for the following dialog page
can be displayed on the "Notes on the topology" dialog page.
Further information can be found on package execution in the Package execution (Page 405)
section.
196
button (Show/hide inactive dialogs) shows or hides dialogs not used in this
button (Display associated system variables) opens the "Notes on the topology
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE