Create MyConfig - Expert
4.5 Component editor
Figure 4-72
Change action in the "INI file" mode
For the package execution in the "INI file" mode, the file specified via the target area path and
task name is opened and the operations specified in the relevant section executed.
If the file or the section is not available, it is created by the package in the target system.
Examples of change action with "Preprocessor script"
Example 1
In the following example, a "Cycle1.spf" cycle is created in the /NC/CMA.DIR path in the
archive.
The N003 to N006 blocks are inserted depending on an Up variable.
270
Change action with INI file
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE