Notes On The Package (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.4 Project folder
Figure 4-12
Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.2.8

Notes on the package (configuration)

You can pass general information to the operator via this dialog.
You can configure the following property groups for the "Notes on the package" dialog page:
● Dialog
158
"Notes about acknowledgment" dialog page - commissioning engineer / operator view
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE