Step Tree (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.4 Project folder
4.4.2.34

Step tree (configuration)

This dialog permits the configuring of the package steps in a hierarchical tree structure.
You can configure the following property groups for the "Step tree" dialog page:
● Dialog
● Step configuration
● Archive
● Dialog scripts
Figure 4-41
By selecting the "data areas" in the "Package" tab, the usable dialog pages are defined in the
"Dialog" tab.
You can find an overview for this in the Dependencies of the dialog pages of data areas
(Page 144) section.
214
Step tree - project engineer view
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE