Siemens SINUMERIK 840D sl Operating Manual page 139

General
The following properties are available:
Table 4-9
Comment
Access
Deployment
The following properties are available:
Table 4-10
User version
Name
Storage location
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Package > General
You can enter project-internal information here.
This comment is not displayed during package execution or in the logbook.
The access rights are displayed and defined here.
Clicking the button opens the "Edit password list [Rights without a password]
(Page 400)" dialog.
General information can be found in Section Password protection (Page 398).
Package > Deployment
1.0
Create MyConfig - Expert
The package can be versioned by the user via the
"User version".
The value is entered in the input field as STRING.
If the contents of the "User version" input field is
interpreted as version, the Up.
$Pack.UserVersion system variable is
changed from the STRING type to the VERSION
type during the package execution. Otherwise the
STRING type is retained.
The Up.$Pack.UserVersion system variable is
"readOnly" during package execution.
With the VERSION type, you can make a compar‐
ison with another version, e.g. greater than, less
than, equal to.
For the STRING type, a comparison can be made
only for equal to.
The user version can also be created with a Win‐
dows environment variable, e.g. %MyVersion%,
when deploying the package.
Specify the name of the package for this deploy‐
ment.
Specify the storage location, i.e. the absolute path
where the package is saved.
4.4 Project folder
139