System Variables For The System Configuration Dialog - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.8 Reference list, system variables
4.8.3.11

System variables for the System configuration dialog

Table 4-50 "System configuration" dialog - SystemConfig (Dialog ID)
System variables Type
Up.$Dialog.SystemConfig.
Activated BOOL
ProcessMode Enumeration Process‐
Mode (Page 382)
InteractLevel Enumeration InteractLe‐
vel (Page 383)
NcSource Enumeration NcSource
(Page 383)
NcFile STRING
PlcSource Enumeration PlcSource
(Page 383)
PlcFile STRING
SdbSource Enumeration
Sdb_Source (Page 384)
SdbFile STRING
DrvSource Enumeration DrvSource
(Page 384)
DrvFile STRING
Note
Changes to system variables as of CMC version 4.7 SP2
The following system variables have been dropped:
● NcProcess
● PlcProcess
● DrvProcess
Further information at:
● Changes to system variables (Page 135) section
See also
System configuration (configuration) (Page 186)
378
Change effective until Description
Last script before dia‐ Activating the dialog processing
log
Current dialog → OnI‐ Enumeration processing mode
nit
Enumeration message level
Enumeration source of the NC
data
Path of the NC data.
Enumeration source of the PLC
data.
Path of the PLC data.
Enumeration source of the SDB
data.
Path of the SDB data.
Enumeration source of the DRV
data.
Path of the DRV data.
Example
false / true
Up.
$Dialog.ProcessModes.MA
NUAL
Up.
$Dialog.InteractLevels.
ALL
Up.
$Dialog.SystemConfig.Nc
Sources.ARCHIVE
"NC.arc"
Up.
$Dialog.SystemConfig.Pl
cSources.ORIGIN
"PLC-Daten.arc"
Up.
$Dialog.SystemConfig.Sd
bSources.FACTORY
"./hw/SDB-Daten.arc"
Up.
$Dialog.SystemConfig.Dr
vSources.TARGET
"DRV.arc"
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE