Siemens Sinamics S120 Function Manual page 441

N o .
C01714 (x00), C30714 (x00); x = 1...4 depending on the SLS level (safely limited
•
speed exceeded)
C01701, C30701 (STOP B initiated)
•
C01700, C30700 (STOP A initiated)
•
4. Analyze trace:
If r9714[0] exceeds the active SLS limit, a safety message (r9722.7 = 0) becomes
•
active
A STOP B is initiated as a consequence (with subsequent stop STOP A)
•
5. Save/print the trace and add it to the acceptance report (refer to the example below)
6. Acknowledge safety messages and, if required, deselect SLS
No safety faults and alarms (r0945[0...7], r2122[0...7], r9747[0...7]) at the drive and
•
TM54F (if one is being used).
Acknowledge switch-on inhibit and run the drive
Check whether the drive is moving
•
Safety Integrated
Function Manual, (FHS), 07/2016, 6SL3097-4AR00-0BP6
D e scri p ti o n
A.3 Acceptance tests (recommendations)
Appendix
Sta tu s
441