Maintenance
9.1
Information pertaining to component replacements
Replacing a c omponent from the perspective of Safety Integrated
Not e
Not e additional safety instructions
Observe the instructions with regard to changing or replacing software components in
Section "Safety instructions (Page 17)"!
The faulty component was replaced according to safety regulations. The information relevant
from the perspective of Safety Integrated is provided in the following. For information about
component replacements, see "Example of component replacements" in the SINAMICS
S120 Function Manual Drive Functions.
● Based on the NodeID and the saved CRC of the particular hardware component, the
drive identifies that a component has been replaced. You can take the responses of the
drive and the actions that have to be carried out from the following table:
Safety Integrated
Function Manual, (FHS), 07/2016, 6SL3097-4AR00-0BP6
9
361