Skip Part-Program Blocks - Siemens SINUMERIK 828D Function Manual

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

This function is selected via the operator interface in the "Program control" menu.

The selection sets the following interface signal:

DB21, ... DBX24.6 (dry run feed rate selected)

This does not activate the function.

The function is activated via interface signal:

DB21, ... DBX0.6 (activate dry run feed)

Active dry run feedrate mode is indicated by a reversal in the relevant field in the status line on the operator

Skip part-program blocks

When testing or breaking in new programs, it is useful to be able to disable or skip certain part program blocks

during program execution. For this, the respective records must be marked with a slash.

Main program/subroutine

Skipping part program blocks

Basic Functions

Function Manual, 09/2011, 6FC5397-0BP40-2BA0

K1: Mode group, channel, program operation, reset response

N40 and N50 during

9.5 Program test

Sinumerik 840d sl