Suppression Of Frames - Siemens SINUMERIK 828D Function Manual

K2: Axis Types, Coordinate Systems, Frames
10.5 Frames
10.5.4.5

Suppression of frames

Programming
Comman
Significance
d
Non­modal suppression of the following frames:
G53
• System frame for cycles
• Programmable frame
• System frame for transformations, workpieces, TOROT and TOFRAME
• Active settable frame
Non­modal suppression of the following frames:
G153
• System frame for cycles
• Programmable frame
• System frame for TOROT and TOFRAME, workpieces
• Active settable frame
• All channel-specific and NCU global basic frames
• System frames for PAROT, PRESET, scratching, ext. ZO
Implicit preprocessing stop and non-modal suppression of frames analog G153 and
SUPA
additional
• handwheel offsets (DRF)
• [ext. Zero offset]
• Overlaid motion
Modal activation of the G500 frame. The G500 frame should be a zero frame.
G500
Deactivate (clear) the handwheel offsets (DRF)
DRFOF
740
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions