Data Lists; Machine Data; Nc-Specific Machine Data; Channel­specific Machine Data - Siemens SINUMERIK 828D Function Manual

2.6

Data lists

2.6.1

Machine data

2.6.1.1

NC-specific machine data

Axis monitoring
Number Identifier: $MN_
10604 WALIM_GEOAX_CHANGE_MODE
10710 PROG_SD_RESET_SAVE_TAB
Protection zones
Number Identifier: $MN_
10618 PROTAREA_GEOAX_CHANGE_MODE
18190 MM_NUM_PROTECT_AREA_NCK
2.6.1.2 Channel­specific machine data
Axis monitoring functions
Number Identifier: $MC_
20150 GCODE_RESET_VALUES
21020 WORKAREA_WITH_TOOL_RADIUS
24130 TRAFO_INCLUDES_TOOL_1
24230 TRAFO_INCLUDES_TOOL_2
24330 TRAFO_INCLUDES_TOOL_3
24426 TRAFO_INCLUDES_TOOL_4
24436 TRAFO_INCLUDES_TOOL_5
24446 TRAFO_INCLUDES_TOOL_6
24456 TRAFO_INCLUDES_TOOL_7
24466 TRAFO_INCLUDES_TOOL_8
24476 TRAFO_INCLUDES_TOOL_9
24486 TRAFO_INCLUDES_TOOL_10
25106 TRAFO_INCLUDES_TOOL_11
25116 TRAFO_INCLUDES_TOOL_12
25126 TRAFO_INCLUDES_TOOL_13
25136 TRAFO_INCLUDES_TOOL_14
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
A3: Axis Monitoring, Protection Zones
Description
Working area limitation during switchover of geometry
axes
Setting data to be updated
Description
Protection zone for switchover of geo axes
Number of files for machine­related protection zones
Description
Initial setting of the G groups
Allowance for tool radius with working area limitation
Tool handling with active transformation 1.
Tool handling with active transformation 2.
Tool handling with active transformation 3.
Tool handling with active transformation 4.
Tool handling with active transformation 5.
Tool handling with active transformation 6.
Tool handling with active transformation 7.
Tool handling with active transformation 8.
Tool handling with active transformation 9.
Tool handling with active transformation 10.
Tool handling with active transformation 11.
Tool handling with active transformation 12.
Tool handling with active transformation 13.
Tool handling with active transformation 14.
2.6 Data lists
141