Channel­specific Machine Data - Siemens SINUMERIK 828D Function Manual

K1: Mode group, channel, program operation, reset response
9.17 Data lists
Number Identifier: $MN_
11620 PROG_EVENT_NAME
11717 D_NO_FCT_CYCLE_NAME
15700 LANG_SUB_NAME
15702 LANG_SUB_PATH
17200 GMMC_INFO_NO_UNIT
17201 GMMC_INFO_NO_UNIT_STATUS
18360 MM_EXT_PROG_BUFFER_SIZE
18362 MM_EXT_PROG_NUM
9.17.1.2 Channel­specific machine data
Basic machine data
Number Identifier: $MC_
20000 CHAN_NAME
20050 AXCONF_GEOAX_ASSIGN_TAB
20060 AXCONF_GEOAX_NAME_TAB
20070 AXCONF_MACHAX_USED
20080 AXCONF_CHANAX_NAME_TAB
20090 SPIND_DEF_MASTER_SPIND
20100 DIAMETER_AX_DEF
20106 PROG_EVENT_IGN_SINGLEBLOCK
20107 PROG_EVENT_IGN_INHIBIT
20108 PROG_EVENT_MASK
20109 PROG_EVENT_MASK_PROPERTIES
20114 MODESWITCH_MASK
20116 IGNORE_INHIBIT_ASUP
20117 IGNORE_SINGLEBLOCK_ASUP
20160 CUBIC_SPLINE_BLOCKS
20170 COMPRESS_BLOCK_PATH_LIMIT
20191 IGN_PROG_STATE_ASUP
20192 PROG_EVENT_IGN_PROG_STATE
20193 PROG_EVENT_IGN_STOP
20210 CUTCOM_CORNER_LIMIT
20220 CUTCOM_MAX_DISC
674
Description
Program name for PROG_EVENT
Subroutine name for D function replacement
Name for replacement subroutine
Call path for replacement subroutine
Global HMI info (without physical unit)
Global HMI status info (without physical unit)
FIFO buffer size for execution from external source
(DRAM)
Number of program levels that can be processed
simultaneously from external
Description
Channel name
Assignment of geometry axis to channel axis
Geometry axis name in channel
Machine axis number valid in channel
Channel axis name in channel [channel axis no.]: 0...7
Initial setting of master spindle in channel
Geometry axis with transverse axis function
Prog events ignore the single block
Prog events ignore the read-in disable
Event­driven program calls
Prog events properties
Setting for REPOS
Execute user ASUBs completely in spite of read­in
disable
Process user ASUBs completely in spite of single-
block processing
Number of blocks for C spline
Maximum traversing length of NC block for
compression
Do not display the execution of the interrupt routine on
the operator panel
Do not display the execution of the program events on
the operator panel
Prog events ignore the Stop key
Max. angle for intersection calculation with tool radius
compensation
Maximum value for DISC
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions