Siemens SINUMERIK 828D Function Manual page 841

Key CPU data
Retentive memory (for retentive DB contents)
Work memory
Load memory (integr. virt. memory module)
Bit memories
Timers
Counter
Clock memory
System functions
SFB
SFC
Program/data blocks
OB
FB
FC
DB
Max. block length DB
Max. block length FC, FB
Inputs/outputs
Logical I/O addressing range
Reserv. log. addressing range for drives
Process image (fixed)
Notice: The inputs/outputs above 4096 are reserved for integrated drives.
1)
Firmware release: Release of the SIMATIC CPU, from which the SINUMERIK PLC CPU is derived.
2)
The memory is also on the CompactFlash Card of the NCU.
3)
Although there are four ports on the front panel, ports PN-P3 and PN-P4 have not been released for use, and are, from
FW 2.6 and higher, permanently deactivated in the configuration.
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
PLC CPU:
1)
Firmware release:
2)
0-5, 32, 52-54, 75,
0-7, 11-15, 17-24,
28-34, 36-44, 46, 47,
49-52, 55-59, 64-74,
101-103, 105-108,
112-114, 126,127
1, 10, 20-21, 32-35,
40, 55-57, 61, 80,
82, 83, 85-87, 100,
P3: Basic PLC Program for SINUMERIK 840D sl
13.2 Key data of the PLC-CPUs for 840D sl and 840Di sl
Type of control
840D sl (NCU 720.2 PN and NCU 730.2 PN)
Integrated PLC 319-3PN/DP
FW 2.4 FW 2.6
256 KB 256 KB
1400 KB 1400 KB
2048 KB 2048 KB
65536 65536
2048 2048
2048 2048
8
0-5, 32, 52-54, 75,
81
0-7, 11-15, 17-24,
28-34, 36-44, 46, 47,
49-52, 55-59, 64-74,
81-84, 81-84,
101-103, 105-109,
112-114, 126,127
1, 10, 20-21, 32-35,
40, 55-57, 61, 80,
82, 83, 85-87, 100,
121-122 121-122
0-2048 0-2048
0-2048 0-2048
1-2048 1-2048
64 KB 64 KB
64 KB 64 KB
0-8191 0-8191
4096-8191 4096-8191
0-255 0-255
FW 2.7
256 KB
1400 KB
2048 KB
65536
2048
2048
8 8
0-5, 32, 52-54, 75,
81 81
0-7, 11-15, 17-24,
28-34, 36-44, 46, 47,
49-52, 55-59, 64-74,
81-84,
101-103, 105-109,
112-114, 126,127
1, 10, 20-21, 32-35,
40, 55-57, 61, 80,
82, 83, 85-87, 100,
121-122
0-2048
0-2048
1-2048
64 KB
64 KB
0-8191
4096-8191
0-255
841