Data Lists; Machine Data; Displaying Machine Data; Nc-Specific Machine Data - Siemens SINUMERIK 828D Function Manual

10.9

Data lists

10.9.1

Machine data

10.9.1.1

Displaying machine data

Number
SINUMERIK Operate
9242
9243
9244
9245
9247
9248
9424
9440
9449
9450
9451
10.9.1.2

NC-specific machine data

Number Identifier: $MN_
10000 AXCONF_MACHAX_NAME_TAB
10600 FRAME_ANGLE_INPUT_MODE
10602 FRAME_GEOAX_CHANGE_MODE
10610 MIRROR_REF_AX
10612 MIRROR_TOGGLE
10613 NCBFRAME_RESET_MASK
10615 NCBFRAME_POWERON_MASK
10617 FRAME_SAVE_MASK
10650 IPO_PARAM_NAME_TAB
10660 INTERMEDIATE_POINT_NAME_TAB
11640 ENABLE_CHAN_AX_GAP
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Identifier: $MM_
MA_STAT_DISPLAY_BASE
MA_TU_DISPLAY_BASE
MA_ORIAXES_EULER_ANGLE_NAME
MA_PRESET_FRAMEIDX
USER_CLASS_BASE_ZERO_OFF_PA
USER_CLASS_BASE_ZERO_OFF_MA
MA_COORDINATE_SYSTEM
ACTIVE_SEL_USER_DATA
WRITE_TOA_LIMIT_MASK
MM_WRITE_TOA_FINE_LIMIT
MM_WRITE_ZOA_FINE_LIMIT
K2: Axis Types, Coordinate Systems, Frames
Description
Numerical basis for display of moving
joint STAT
Numerical basis for display of rotary
axis position TU
Display of orientation axes as Euler
angle
Value storage scratching and
PRESET
Availability of basic offset in
"Parameters" operating area
Availability of basic offset in Machine
operating area
Coordinate system for actual­value
display
Active data (frames) are immediately
operative after editing
Applicability of MD9203 to edge data
and location­dependent offsets
Limit value for wear fine
Limit value for offset fine
Description
Machine axis name
Sequence of rotation in the frame
Frames and switchover of geometry axes
Reference axis for mirroring
Change over mirror
ActiveNCU-global basic frame after reset
Reset global basic frames after Power On
Behavior of frames for SAVE subprograms
Name of interpolation parameters
Name of intermediate point coordinates for G2/G3
Channel axis gaps are allowed
10.9 Data lists
811