Siemens SINUMERIK 828D Function Manual page 929

Typ
Signal
e
MCPBusType I
HHU I
BHGIn I
BHGOut I
BHGStatSend I
BHGStatRec I
BHGInLen I
BHGOutLen I
BHGTimeout I
BHGCycl I
BHGRecGDNo I
BHGRecGBZNo I
BHGRecObjNo I
BHGSendGDNo I
BHGSendGBZNo I
BHGSendObjNo I
BHGMPI I
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Type Value range
BYTE
INT 0, 5
POINTER E0.0 to E124.0
or
M0.0 to M252.0
or
DBn DBX0.0 to DBXm.0
POINTER A0.0 to A124.0
or
M0.0 to M252.0
or
DBn DBX0.0 to DBXm.0
POINTER A0.0 to A124.0
or
M0.0 to M252.0
or
DBn DBX0.0 to DBXm.0
POINTER A0.0 to A124.0
or
M0.0 to M252.0
or
DBn DBX0.0 to DBXm.0
BYTE HHU default:
B#16#6 (6 Byte)
BYTE HHU default:
B#16#14 (20 Byte)
S5time Recommendation: 700 ms
S5time Recommendation: 100 ms
INT HHU default: 2
INT HHU default: 2
INT HHU default: 1
INT HHU default: 2
Int HHU default: 1
INT HHU default: 1
BOOL false
P3: Basic PLC Program for SINUMERIK 840D sl
Comment
Righthand half byte (bits 0...3) for MCP1
Lefthand half byte (bits 4...7) for MCP2
b#16#33: PROFIBUS
b#16#44: PROFIBUS on the MPI/DP port
b#16#55: Ethernet
B#16#66: PROFINET
Mixed mode possible, see Chapter "
Configuration machine control panel,
handheld unit, direct keys [Page 894] "
Handheld unit interface
0: No HHU
5: HHU on Ethernet
Start address
PLC receive data
from HHU
Start address
PLC transmit data
to HHU
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Ethernet DIP switch
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
13.13 Block descriptions
929