10.2.2. Cables and wires
Cables and wires in the drive are equipped with marker sleeves that carry the same identifying
number as on the wiring diagrams.
Key:
(1)
Terminal number
Fig. 96. Cable and wire designation
10.2.3. Understanding wiring diagrams
For information on item designation and cross-reference conventions, see "Appendix D –
Wiring diagrams".
10.3. Alarm / fault indications
When a failure occurs in the drive or in the equipment monitored by the drive (eg, main circuit
breaker, transformer, cooling system), the CDP control panel displays a corresponding alarm or
fault message.
PRODUCT
ACS5000W gen. 2
1
2
DOCUMENT KIND
User manual
PREVENTIVE AND CORRECTIVE MAINTENANCE
(2)
Wire number
DOCUMENT ID.
3BHS799208 E01
REV.
LANG.
PAGE
J
en
160/186