ABB ACS5000 User Manual page 16

Term Definition
DriveWindow is a DriveWare® product. DriveWindow is a 32-bit Microsoft
DriveWindow Windows® application for commissioning and maintaining ABB drives equipped
with optical communication links.
DriveMonitor is a monitoring and diagnostics system that allows secure access to
the frequency converter via the Internet from a remote location. DriveMonitor
DriveMonitor
provides long-term monitoring functions that allow to infer equipment status
and improve equipment performance.
EAF Earth fault monitoring
EMC Electromagnetic compatibility
EOI Electrical-optical interface
Equipment Frequency converter and related equipment
The excitation unit (EXU) is part of the drive when a synchronous motor has to be
EXU
supplied with excitation power.
Frame sizes 1 to 4 give the different power ranges. The higher the frame size, the
FS
greater the output power capability.
Ground Earth
To connect the electrical equipment to the earth, eg, by a grounding set or a
To ground
grounding switch.
Term of ABB's S800 I/O process system. An I/O device consists of a module
I/O device
termination unit (MTU) and one I/O module.
Term of ABB's S800 I/O process system. The I/O module is an active input or
I/O module
output device for digital or analog signals.
Term of ABB's S800 I/O process system. The I/O station typically consists of a bus
I/O station
modem and several input and output devices.
IGCT Integrated gate-commutated thyristor
IPS Insulated power supply
LED Light emitting diode
LSU Line supply unit (rectifier phase module)
The main circuit breaker (MCB) is a major protection device of the drive system
MCB
and connects and / or disconnects the main power supply to the drive.
Motor terminal This is the customer terminal for connecting motor cables. It is located behind the
section swing frame of the COU compartment.
Monitoring and diagnostics tool that allows access to the drive from any location
NETA-21
in the world via a secure Internet connection.
NP Neutral point
OEI Optical-electrical interrupter
A primary phase converter unit (PCU) consists of a transformer terminal section,
PCU a rectifier stack, a DC link and an inverter stack.
A secondary phase converter unit consists of a DC link and an inverter stack.
The phase module is a compact assembly of wired components including power
Phase module semiconductors and circuit boards that serves as a standardized building block
for the inverter and rectifier stack.
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
ABOUT THIS MANUAL
REV. LANG. PAGE
J en 16/186