Opening The Doors; Closing And Locking The Doors - ABB ACS5000 User Manual

1

10.6.3.2. Opening the doors

1. To release the door handle, insert and turn the key to the right.
The door handle pops out.
2. Turn the door handle:
• Right if the door is hinged on the right
• Left if the door is hinged on the left.

10.6.3.3. Closing and locking the doors

1. Align the door handle with its base and press the handle down until it snaps into place.
2. Verify that the drive is supplied with auxiliary voltage.
3. Slide the locking bar from the unlocked (1) to the locked (2) position.
IMPORTANT! A limit switch monitors the locked position of the locking bar; you cannot start
the drive if the door is not properly locked.
1
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
PREVENTIVE AND CORRECTIVE MAINTENANCE
2
2
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
J en 172/186