Displaying A Fault And Resetting The Fault Memory - ABB ACS5000 User Manual

6. To confirm the selection and to return to the actual signals display, press the ENTER key.
7. To cancel the selection and keep the original selection, press any of the mode selection
keys.
The selected keypad mode is entered.
ACT PAR FUNC DRIVE

9.2.2.6. Displaying a fault and resetting the fault memory

1. To open the actual signals display, press the ACT key.
ACT
2. To change to the fault memory display, press a fast navigation key.
PRODUCT
ACS5000W gen. 2
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
NP VOLT 0 V
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW
1 L -> 600.0 rpm
1 LAST FAULT
+Overspeed
070730 12:30:02.3256
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
CDP CONTROL PANEL
REV. LANG. PAGE
J en 145/186