Storage And Handling Of Spare Parts; Warranty Information; Disposal Of Packaging Materials And Components - ABB ACS5000 User Manual

4.7. Storage and handling of spare parts

NOTICE
Risk of component damage. Static electricity can damage printed circuit boards.
→ Apply static-sensitive precautions when you handle spare parts.

4.7.1. Warranty information

IMPORTANT! Inspect all spare parts upon receipt and make note of any damage. Inform ABB
and the shipping company of the damage.
To keep spare parts in good condition and to keep the warranty valid during the warranty
period:
– Store spare parts in their original packaging.
– Store printed circuit boards in antistatic bags or boxes.
– Maintain a storage temperature range of -5 °C to + 55 °C
– Maintain the following storage place conditions:
• Free of vibration and shock.
• Protected against dust, sand, vermin and insects.
• Free of corrosive gases, salt or other impurities that could damage electronic
equipment.
• Maintain a relative air humidity of 5 to 95% (dry with no condensation)
If you cannot keep the relative air humidity in this range, protect spare parts with an
external heater.
– DO NOT touch a component without wearing a wrist grounding strap.
• Place a component on a grounded working surface that is protected against
electrostatic discharges.
• Hold a component only at the edge.

4.8. Disposal of packaging materials and components

Dispose of the packaging materials and components at the end of the life time of the drive
according to local regulations.
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
TRANSPORTATION, STORAGE, AND DISPOSAL
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
J en 65/186