Preventive And Corrective Maintenance; General Information; Required Qualification; Maintenance Schedule - ABB ACS5000 User Manual

10. Preventive and corrective maintenance

10.1. General information

During the warranty period of the drive, any maintenance must be carried out exclusively by ABB
service personnel. After the warranty period, repair work may only be carried out by
certified personnel.

10.1.1. Required qualification

To maintain safe and reliable operation of the drive, ABB recommends taking out a service
contract with the ABB service organization.

10.1.2. Maintenance schedule

Carry out all maintenance tasks according to the maintenance schedule, on time and at the
stated intervals in the "ACS5000 preventive maintenance schedule", 3BHS855274 E01.

10.1.3. Logbook

It is recommended to record all troubleshooting and maintenance work in a logbook including:
– Date and time
– Detailed description

10.1.4. Spare parts

To ensure safe and reliable operation, use only spare parts recommended and approved by ABB.
For information on types and identification codes, see "Appendix E – Parts list".

10.2. Identifying electrical equipment

10.2.1. Device designation

To facilitate the identification in wiring diagrams and parts lists, all devices are labeled in
accordance with IEC 81346-1.
-A2501

Fig. 95. Device identification

PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
PREVENTIVE AND CORRECTIVE MAINTENANCE
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
J en 159/186