Setting The Transparent Transmission Function For The Ecc800 Collector - Huawei FusionModule1000A20 Commissioning Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
After the ECC800 device is bound, select the ECC800 device in the left navigation tree. Then,
change the authentication password in the Management Info area so that the password on the
ECC800 WebUI is the same as that on the NetEco for the ECC800 to connect to the NetEco
properly. The preset authentication password for the ECC800 device is Modifyme_123.
Perform the following operations on the Modify page:
1. Enter the new password in the New password and Confirm password text boxes.
2. Perform the following operations as required in the Send To Device column.
–
–
3. Click OK.
You are advised to change the password once every three months.
Step 6 You can perform the following operations after clicking the device icon:
●
----End

?.3. Setting the Transparent Transmission Function for the ECC800 Collector

Context
●
●
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > NMS Application > Transparent Transmission
Channel.
Step 3 Set COM2(Port:3212) to Enable and click Submit.
Mapping relationship: COM1 corresponds to port 3211, COM2 port 3212, COM3 port 3213, and
COM4 port 3214.
●
Issue 03 (2022-12-15)
NO TE
If YES is selected, change and synchronize the authentication passwords for the ECC800
and ECC800 WebUI synchronized on the server so that the authentication passwords on
both sides are the same.
If NO is selected, change the authentication password for the ECC800 synchronized on
the server.
Select Manage under
Using the transparent transmission function, the NMS can directly manage
southbound components that are not monitored by the ECC800.
In this example, the COM2 port of the ECC800 is used for transparent
transmission.
NO TE
If the port is set for the first time, you are prompted to set an authentication
password. On the Set Authentication Password tab page, set
Authentication password and Confirm authentication password and click
Submit.
NO TE
Enable Security Authentication is set to Enable by default. If so, an authentication
password must be set. If Enable Security Authentication is set to Disable, there is no
need to set an authentication password but this is risky.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
to view Overview.
92