Scenarios For Connecting The Server; Setting Sms - Huawei FusionModule1000A20 Commissioning Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
Figure 9-16 Page for managing transparent transmission channels
----End

9.3.3.3 Scenarios for Connecting the server

9.3.3.3.1 Setting SMS

This section describes how to set the interworking parameters of the SMS modem
on the NetEco. This ensures that the NetEco can communicate with the SMS
modem properly and the modem sends short messages to users properly.
Prerequisites
●
●
●
●
Context
Issue 03 (2022-12-15)
You have logged in to the NetEco client by web browser
An SMS modem has been installed and commissioned.
You have obtained the interworking parameters, such as the phone number
for receiving the notification, of the SMS modem from users.
You have the operation rights for Set Notified Server.
NO TE
● The SMS modem is not supported in cloud deployment scenarios.
● You need to input calling number and Email for sending remote alarm notification.
Therefore, you are obligated to take considerable measures, in compliance with the laws
of the countries concerned and the user privacy policies of your company, to ensure that
the personal data of users is fully protected.
● Personal data such as phone numbers and Email addresses are anonymized in the
NetEco GUI and encrypted in the NetEco during batch data transmission to ensure data
security.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
94