Process Of Adding A Device - Huawei FusionModule1000A20 Commissioning Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide

9.3.3.1.11 Process of Adding a Device

Prerequisites
●
●
Interface Introduction
Figure 9-14 Adding a device
Table 9-9 Description of the page for adding a device
Area
(1)
Management
domain
navigation tree
(2) Device
selection area
(3)
Management
domain
(4) Device
(5) Parameter
setting area
(6) Save
Issue 03 (2022-12-15)
You have logged in to the NetEco client by web browser.
You have the operation rights for Data Center Planning.
Operation
In the management domain navigation tree, select the
management domain to which the device to be added
belongs.
Click the Device tab, select a device type from the drop-down
list box, and click the device to be added.
Drag the selected device to the management domain.
Click the device. The parameter setting area is displayed in the
right pane.
Set device parameters in the parameter setting area.
Click Save. The device is added.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
88