Huawei FusionModule1000A20 Commissioning Manual page 108

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
Step 4 Create a user.
When connecting to the VCN on the NetEco, you need to log in to the VCN as a
non-admin user.
1.
2.
3.
4.
----End
Issue 03 (2022-12-15)
Log in to the VCN IVS as user Admin.
NO TE
If the VCN software version is V100R003 or later, the default user name is admin.
If the VCN software version is V100R002 or earlier, the default user name is Admin.
On the VCN IVS home page, double-click Add User, create a user, and click
Next. The Assign Rights page is displayed.
NO TE
When creating a user, you can select Enable account validity period and set Valid from
and Valid to to set the account validity period for the created user.
Figure 9-23 Creating a user
Set Multi-point logins to a value greater than 2.
In the Assign Device View Rights area, select the cameras to be browsed and
queried by the user. Set other parameters based on the documentation
delivered with the equipment or the documentation obtained by referring to
the Preparing Documentation section, and click Finish.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
101