Huawei FusionModule1000A20 Commissioning Manual page 102

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
Procedure
Step 1 Choose System > System Settings > Set Notified Server from the main menu.
The Set Notified Server window is displayed.
Step 2 In the navigation tree on the left, choose SMS Modem.
Step 3 Set interworking parameters of the SMS modem. For details, see
Figure 9-17 Setting interworking parameters of the SMS modem
Table 9-13 Parameters of the SMS modem
Parameter
Network system
of SMS modem
SMS modem
serial port
SMS modem
bound rate
Mobile number
for receiving
notification
Step 4 Click Apply to save the settings.
● Click Test to check the connection between the NetEco and the SMS modem.
● Click Reset to reset interworking parameters of the SMS modem.
----End
Issue 03 (2022-12-15)
Description
RAT of the SMS modem: GSM.
Serial port for connecting the SMS modem on the server.
COM1 or COM2.
SMS modem bound rate provided in the SMS modem user
manual.
115200, 9600 or 4800.
Phone number to which the short messages are sent.
NOTE
Mobile number for receiving notification must be set according to
the following requirements:
1. A country code must be added preceding the calling number. For
example, if the subscriber is located in China, the entered calling
number is in the following format: 86 + Calling number.
2. If short messages are successfully sent but the subscriber does
not receive the short messages, you need to remove the country
code.
NO TE
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
Figure 9-17.
95