Toro Greensmaster eFlex 1021 Service Manual page 77

Installing the Transmission Gear Box Assembly
Greensmaster ® eFlex 1021
20248SL Rev A
Note: Refer to Figure 23
1. Install the electric motor (22) and motor adaptor (18) onto the transmission
gear box assembly (6) and secure with the two socket head screws (19).
2. Position the transmission gear box assembly (10) onto the frame assembly
and secure with 2 bolts (9) and a socket head screw (19).
3. Install and adjust the slider adapter (7) until the neutral position is achieved
and lock the position with jam nut (8) onto the transmission gear box
assembly (10).
4. Install the splined couplers (2) to the drive shaft (5) and secure with truss
screws (1), washers (3) and nuts (4). Torque tighten the truss screws to 10 to
12.4 N∙m (90 to 110 in-lb).
5. Slide the hex tube (16) onto the reel drive box assembly and lock with collar
lock (15).
6. If removed, install the reel cable; refer to
7. Install the brake cable; refer to
8. Connect the battery pack; refer to
(page 5–3).
during this procedure.
Installing the Reel Cable (page
Installing the Brake Cable (page
Connecting the Lithium Battery Pack
Page 4–31 Traction and Reel Drive Systems: Service and Repairs
6–8).
6–5).