Toro Greensmaster eFlex 1021 Service Manual page 132

Charging the Lithium-Ion Batteries
Removing the Lithium-Ion Battery
Electrical System: Service and Repairs
When charging lithium-ion battery:
• Use only the Toro-specified lithium-ion charger designed to
charge your machine. Do not attempt to use any other battery
charger.
• Do not over-charge or over-discharge lithium-ion battery.
Failure to follow these recommendations may result in personal
injury and property damage.
The eFlex lithium ion battery pack requires regular charging that is provided
by the lithium battery pack charger (included with the machine). The output
voltage and current of the charger are controlled with CAN communication with
the battery management system. Ensure that the charger is connected to the
battery pack whenever the machine is not in use.
Refer to the Operator's Manual for battery charging and battery charger
operation information. Refer to Battery Charger Error and Fault Codes for battery
charger troubleshooting information.
When removing or installing the battery:
• Always disconnect the battery at the battery disconnect provided
when servicing products with lithium-ion battery.
• Always service lithium-ion battery with the machine parked near a
service door large enough to move the product or battery outside
in case of an emergency and keep a fire blanket nearby. Do not
use a fire extinguisher on lithium-ion battery.
Failure to follow these recommendations may result in personal
injury and property damage.
WARNING
WARNING
Page 5–52 Greensmaster ® eFlex 1021
20248SL Rev A