Toro Greensmaster eFlex 1021 Service Manual page 69

Disassembling the Transmission Gear Box Assembly
g339791
1. Retaining ring
2. Spacer bushing
3. O-ring
4. Straight bushing (2 each)
5. Retaining ring (2 each)
6. Oil seal (2 each)
7. Flange bushing (2 each)
8. ORB plug
9. Detent spring
10. Detent ball
Greensmaster ® eFlex 1021
20248SL Rev A
11. Grease seal
12. Ball bearing (2 each)
13. Spacer
14. Oil seal (2 each)
15. Oil seal
16. Sleeve bushing (2 each)
17. Dowel pin
18. O-ring seal
19. Traction selector shaft
20. Groomer pin
Note: Refer to Figure 24
1. Remove the hollow hex plug (item 27 in
adapter-vent (29) from the transmission gear box assembly (26).
2. Remove the 12 socket head screws (24) that secures the transmission
cover assembly (23) to the transmission housing assembly (26). Remove
the transmission cover assembly and transmission gasket (22) from the
transmission housing assembly. Discard the transmission gasket (22).
Figure 24
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
during this procedure.
Figure
Page 4–23 Traction and Reel Drive Systems: Service and Repairs
Brake mount pin
Transmission gasket
Transmission cover
Socket head screw (12 each)
Ball bearing (2 each)
Transmission housing
Hollow hex plug
E-ring
Adapter-vent
Breather-vent
24), breather-vent (30) and