Service And Repairs; Reel Drive Belt - Toro Greensmaster eFlex 1021 Service Manual

Service and Repairs

Reel Drive Belt

g312311
1. Reel drive box assembly
2. Reel belt
3. Idler arm
Removing the Reel Drive Belt
Greensmaster ® eFlex 1021
20248SL Rev A
4. Carriage bolt
5. Bolt Gasket
6. Reel drive cover
The greensmaster machines use a positive drive belt on the right side of the
machine to operate the cutting unit.
Note: Refer to Figure 13
1. Park the machine on a level surface. Disconnect the battery pack; refer to
Connecting the Lithium Battery Pack (page
2. Remove the 4 socket head screws (7) that secures the reel drive cover (6)
to reel drive assembly (1) and remove the reel drive cover to expose the
reel drive belt (2).
3. Remove and inspect the reel drive gasket (5) from the reel drive assembly
(1). Discard the reel drive gasket (5), if damaged.
4. Loosen the nut of carriage bolt (4) and rotate the idler arm (3) to release
the tension on the reel drive belt (2).
Figure 13
during this procedure.
Page 4–5 Traction and Reel Drive Systems: Service and Repairs
7. Socket head screw (4 each)
5–3).