Service And Repairs; Electric Motor - Toro Greensmaster eFlex 1021 Service Manual

Service and Repairs

Electric Motor

g339147
1. Frame assembly
2. Transmission gear box assembly
3. Socket head screw (4 each)
Removing the Electric Motor
Electrical System: Service and Repairs
4. Motor adaptor
5. Socket head screw (3 each)
6. Closed cell foam seal
Note: A damaged electric motor assembly may cause a #7, #8, #9, or #10 fault
to be generated and displayed on the InfoCenter display. Refer to the
Screen (page 5–15) for information on faults.
1. Park the machine on a level surface and make sure that the clutch bail in the
NEUTRAL position. Turn the key switch to the OFF position and remove
the key from the key switch.
2. Disconnect the battery pack; refer to
(page 5–3).
3. Disconnect the electric motor connections from the machine wire harness.
4. Support the electric motor to prevent it from falling.
Figure 67
Connecting the Lithium Battery Pack
Page 5–42
7. Key
8. Electric motor
Greensmaster
20248SL Rev A
Faults
® eFlex 1021