Adjustments
g312311
1.
Reel drive box assembly
2.
Reel belt
3.
Idler arm
Adjusting the Reel Drive Belt
Greensmaster
®
eFlex 1021
20248SL Rev A
4.
Carriage bolt
5.
Bolt Gasket
6.
Reel drive cover
1. Park the machine on a level surface. Disconnect the battery pack; refer to
Connecting the Lithium Battery Pack (page
2. Remove the 4 socket head screws (7) that secures the reel drive cover (6)
to the reel drive assembly (1) and remove the reel drive cover to expose
the reel drive belt (2).
3. Check the reel belt (item 2 in
between pulleys with 18 to 22 N (4 to 5 lbs) of force. The belt should deflect
6.35 mm (0.25 inch). If deflection is incorrect, proceed to next step. If
deflection is correct, continue operation.
Figure 12
Figure
12) tension by depressing at mid span
Page 4–3
Traction and Reel Drive Systems: Adjustments
7.
Socket head screw (4 each)
5–3).