Brake Latch Shaft - Toro Greensmaster eFlex 1021 Service Manual

Brake Latch Shaft

g336961
1. Shoulder bolt
2. Flange bushing (2 each)
3. Lever
4. Brake lock lever
Disassembling the Brake Latch Shaft
Greensmaster ® eFlex 1021
20248SL Rev A
5. Roll pin
6. Bolt
7. Flange bushing (2 each)
8. Flange nut
Note: Refer to Figure 83
1. Park the machine on a level surface. Ensure that the key switch is in OFF
position and the traction control is in NEUTRAL.
2. Disconnect the battery pack; refer to
(page 5–3).
3. Remove the bolts and washers that secures the control covers to the upper
receiver weldment.
4. Using the drift pin, remove the roll pin (5) from the brake lock lever (4).
5. Slide and remove the brake lock lever (4) from the brake latch shaft (9).
6. Slide and remove the brake latch shaft (9) from the upper receiver weldment
(12).
7. Slide and remove the torsion spring (10) from the brake latch shaft (9).
Figure 83
10.
11.
12.
during this procedure.
Connecting the Lithium Battery Pack
Page 6–11 Controls, Wheels and Accessories : Service and Repairs
9. Brake latch shaft
Torsion spring
Flange nut
Upper receiver weldment