Toro Greensmaster eFlex 1021 Service Manual page 175

Installing the Bedknife (continued)
Greensmaster ® eFlex 1021
20248SL Rev A
Do not use an impact wrench to tighten screws into the bedbar.
3. Use new screws to secure bedknife to bedbar. Apply anti-seize lubricant to
the threads of new screws. Do not apply anti-seize lubricant to the taper
of the screw heads.
4. Install all screws but do not tighten.
5. Using a torque wrench and bedknife screw tool, tighten the 2 outer screws to
1 N·m (10 in-lb).
6. Working from the center of the bedknife toward each end, tighten screws
from 23 to 28 N·m (200 to 250 in-lb).
7. After installing the bedknife to bedbar, grind the bedknife.
IMPORTANT
Page 7–11 DPA Cutting Units: Service and Repairs