Toro Greensmaster eFlex 1021 Service Manual page 152

Disassembling the Handle Assembly (continued)
g337168
1. LH bail bracket
2. Bolt (2 each)
3. Flange bushing (4 each)
4. Clutch bail assembly
5. Clutch bail link
6. Compression spring
Controls, Wheels and Accessories : Service and Repairs
25. Remove the handle adjuster assembly from the upper receiver weldment and
separate handle torsion spring (23) and spring spacer (24) from the handle
adjuster assembly (22).
7. Handle mount
8. Flange nut (4 each)
9. Nut (2 each)
10. Upper receiver weldment
11. Bolt (2 each)
12. Flange bushing (2 each)
26. Remove the 2 nuts (item 8 in
handle (16) to handle mount (7). Remove the handle from the clutch bail
assembly and the handle mount.
27. If necessary, remove the 2 screws (14) that secures the LH and RH bail
brackets (1 and 15) to the handle (16).
28. Remove the flange nut (8), and bolt (2) that secure the clutch bail link (5) to
the handle mount (7). Remove the 2 flange bushings (3) and spacer tube
(13) from the handle mount.
Figure 86
13.
14.
15.
16.
17.
Figure 86) and 2 bolts (17) that secures the
Page 6–16
Spacer (2 each)
Delta screw (2 each)
RH bail bracket
Handle
Bolt (2 each)
Greensmaster ® eFlex 1021
20248SL Rev A