Rail Kit Wheels (Optional) - Toro Greensmaster eFlex 1021 Service Manual

Rail Kit Wheels (Optional)

Removing the Rail Kit Wheel
Installing the Rail Kit Wheel
Greensmaster ® eFlex 1021
20248SL Rev A
g261683
1. Wheel hex shaft
2. Wheel clip
1. Park the machine on a level surface. Ensure that the key switch is in OFF
position and the traction control is in NEUTRAL.
2. Support the machine onto the kickstand.
3. Remove the wheel clip, and remove the rail kit wheel from the wheel hex
shaft on each side.
4. If necessary, install the transport wheels; refer to
Wheel (page 6–24).
1. Ensure that the machine is parked on a level surface.
2. Support the machine onto the kickstand.
3. If installed, remove the transport wheels; refer to
Wheel (page 6–22).
4. Slide the rail kit wheel onto the wheel hex shaft and secure the wheel with
a wheel clip.
Figure 93
3. Rail kit wheel
Page 6–25 Controls, Wheels and Accessories : Service and Repairs
Installing the Transport
Removing the Transport