Toro Greensmaster eFlex 1021 Service Manual page 142

Installing the Brake Cable (continued)
Controls, Wheels and Accessories : Service and Repairs
side of the slot. Adjust and tighten the jam nuts so that equal amount of
cable threads are visible above and below jam nuts.
3. Make final adjustment of the brake cable at the brake cable lever assembly.
Adjust the cable jam nuts to remove the slack in the brake cable.
4. Check the brake cable adjustment; refer to Operator's Manual.
5. Install the lower cover and control cover to the handle assembly.
6. Connect the battery pack; refer to
(page 5–3).
Connecting the Lithium Battery Pack
Page 6–6 Greensmaster ® eFlex 1021
20248SL Rev A