Toro Greensmaster eFlex 1021 Service Manual page 115

Testing the Throttle and Clutch Bail Potentiometers (continued)
Greensmaster ® eFlex 1021
20248SL Rev A
6. After you complete the testing, secure the potentiometers to the machine
(Figure 59). Secure the wire harness connector to the potentiometer. Secure
the handle cover to the handle.
Note: When re-installing the potentiometers, a minimum voltage reading of
0.5V for proper function is required. This can be read in the InfoCenter. The
adjustment is completed by rotating the potentiometers in the mounting slots
until the minimum voltage at the neutral position is achieved.
7. Connect the battery pack; refer to
(page 5–3).
Connecting the Lithium Battery Pack
Page 5–35 Electrical System: Testing the Electrical Components