How To Install A Network Security Certificate - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual









Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Maintenance > Configuration File and click Restore Factory Settings.
Step 3 Enter the password currently used for logging in to the WebUI and click Submit.
----End

9.1.4 How to Install a Network Security Certificate?

Context



Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Upload a network security certificate.
1.
2.
Issue 07 (2020-03-16)
Parameters in Plan View under Home will be cleared.
Parameters in System, Power Distribution, Aisle, Air Conditioner, and IT Cabinet
under Monitoring will be restored to default values. For example, on the
AI/DI_1–AI/DI_6 setting tab page (displayed after you choose System > ECC800 >
Running Parameters), AI/DI_1 sensor-AI/DI_6 sensor will be restored to Disable. On
the IP device number tab page, IP device num will be restored to 0. On the online
detection timeout interval tab page, Online detection timeout interval will be restored
to 30.
Parameters in Basic Alm Para and Alarm Linkage in Alarm Parameter Settings
under System Settings will be restored to default values.
Parameters in SNMP Settings under System Settings will be restored to default values
(SNMP version: SNMPv3; SNMP port: 161).
Communication Parameters in NetEco under System Settings will be restored to
default values (server IP: 192.168.0.10; port number: 31220; monitoring IP address for
link setup: WAN_1).
Smart module name in Smart Module Settings under System Settings will be restored
to FusionModule and System Type to FusionModule2000.
Parameters in Video Settings under System Settings will be restored to default values.
Parameters in PLC under System Settings will be restored to default values.
PUE function and PUE configuration mode in PUE Configuration under System
Settings will be restored to Enable and Standard respectively.
You have copied a network security certificate and its key you obtained to the PC.
Install a network security certificate if a security certificate problem message is
displayed when you attempt to log in to the ECC800 WebUI.
You need to apply to an organization authorized by the customer for a network security
certificate and its key with the ECC800 IP address or domain name. This section
describes how to import the certificate and key.
Choose System Settings > Smart Module Settings.
Select a certificate format from the drop-down list box.
Copyright © Huawei Technologies Co., Ltd.
9 FAQ
189